Ford Model A "Spring Over" Banjo Spring Perches - Fits Ford and Lincoln Brakes

DESCRIPTION

"Back in the day", it was common practice for mounting a later banjo "spring over" in a Model A frame. Which required cutting the spring perches off a set of stock Model A axle tubes and a considerable amount of grinding and machine work. These Model A Spring Over Perches are bolt in/weld on universal fit for both early Ford and Lincoln hydraulic brakes. They can also be used in a weld on application for later model rears (Ford 9"/ 55 Chevy). 

What's Included

• 2 SOP brackets, (2 spacers for Lincoln only), Grade 8 Hardware
• Made in the USA 
• Lightening holes for easy brake line pass through
• Left and right side fitment with 3 degrees of positive pitman angle built into brackets. This means rear will point up 3 degrees.
• Use the same brackets for Ford or Lincoln brakes, however the Lincoln option will come with additional spacers
• Available with or without spring shackles and urethane bushings

FORD REAR END FITMENT:

1935-1948 Passenger and 1/2 Ton Truck

Will NOT fit 1932-1934 rears. In this case please see our universal weld on brackets found here.

PLEASE NOTE: Some rear end castings may require light grinding to fit perches and align bolt pattern.